在干粉砂漿中的性能
a .提高砂漿的施工性能
當刮抹 ( 剪切力 ) 作用于木質纖維的三維網狀結構上時,該結構中吸附的液體就會釋放到體系中,纖維結構發生變化并沿著運動方向排列,導致體系的粘度下降,和易性提高。當剪切力停止后,纖維結構又回到原來的三維網狀結構,體系恢復到原有的粘度狀態。
b .增稠和纖維增強性能
木質纖維具有三維纖維素結構,具有很好的穩定性和明顯的交聯效應。該結構可以有效地附著液體結構,如水、乳膠、瀝青等不同稠度的液體,其增稠性取決于纖維的長度,纖維越長,增稠效果越明顯。
c .延長開放時間
木質纖維的毛細管起到輸送水份的作用,砂漿固化時,通過毛細管將內部的水份輸送到表面,從而延長了開放時間。
d .良好的液體吸附性能
木質纖維可以通過自身的毛細管作用吸收和輸送液體。
e .抗流掛性能
由于木質纖維具有增稠性能,可以提高砂漿體系的屈服值,從而提高了砂漿體系的抗流掛性能。
f .抗開裂性能
木質纖維的三維網狀結構可以有效地吸收和減弱砂漿體系在固化和干燥過程中所產生的機械能,從而達到了抗開裂作用。
g .減少收縮性能
木質纖維的尺寸穩定性很好,可以大大減少干燥收縮性。
在干粉砂漿中的應用
型號 |
BWW40 |
ZZC500 |
顏色 |
白色 |
灰色 |
平均長度 μm |
200 |
400 |
礦物粉料粘結劑 |
●● |
●● |
礦物填縫劑、膩?zhàn)邮喟? |
●● |
|
膏狀飾面砂漿 |
||
膏狀瓷磚膠粘劑 |
●●● |
●● |
膏狀填縫劑、找平膩?zhàn)? |
||
膏狀石膏板填縫劑 |
||
礦物飾面砂漿 |
||
礦物保溫砂漿 |
●● | |
礦物打底砂漿 |
●●● | |
外墻外保溫體系 |
●●● | |
輕質礦物打底砂漿 |
●●● |
注: ●●● 特別推薦 ●● 推薦 ● 適合
一、產品簡介
木質纖維取自冷杉或山毛櫸等纖維強勁的樹種,他是天然材料且吸水而不溶于水(不同于水溶性的甲基纖維素或其他纖維衍生物)。木質纖維有不同品級(如纖維長度、比重、白度等)以適用不同需要,它也是石棉的最佳替代物。它非常適用于預混的干粉或膏狀的建材產品,如:保溫砂漿抹面、耐水膩?zhàn)?、瓷磚粘接劑、嵌縫石膏、乳膠漆、凹凸花紋浮雕涂料等。
二、產品特性
添量少(干重的 0.3 ~ 0.5 %,最大量可到 1 %)
作用大(抗裂、和易性好等)
提高柔性、增稠、抗裂、和易性好、低收縮、抗垂等,與纖維素醚類配合使用效果更佳
三、重要用途
木質纖維具有強烈的交聯功能,與其他材料混合后纖維之間會立即搭接得象毯子一樣,這個三維空間結構可將自身重量 2 ~ 6 倍的水鎖在其間以保水緩凝,同時這個結構還具有傳導水份的功能,使其自身表面和界面處有足夠水份進行水化,從而減少空鼓、掉粉,尤其是裂縫現象的產生,當外力作用于其上時(如攪拌、刮抹,泵送等),纖維結構會被打破,這時部分水份會從纖維中甩出,使粘度降低,和易性提高;當外力停止時,纖維結構又迅速恢復并將水份吸回來,并恢復原有粘度。木質纖維所具有的這個特點可大大改善建筑材料施工過程中的操作性能。添加量為 0.3 ~ 1.0 %。
四、適用范圍
木質纖維長度 |
顏色 |
水泥抹灰 |
瓷磚粘接劑 |
耐水膩?zhàn)? |
保溫砂漿 |
乳膠漆 |
凹凸花紋涂料 |
300μm |
白 |
|
|
● |
|
● |
|
300μm |
灰白 |
|
● |
● |
|
● |
|
500μm |
灰白 |
|
|
● |
● |
|
● |
1000μm |
灰 |
● |
|
|
● |
|
● |
五、參考用量
1 、內外墻耐水膩?zhàn)臃郏好繃嵦砑恿?0.3 ~ 0.5 %,選用 300um 長度纖維。
2 、外墻外保溫砂漿:每噸添加量 0.5 %,選用 500 ~ 1000um 長度纖維。
3 、陶瓷墻地磚膠粘劑:每噸添加量 0.3 ~ 0.5 %,選用 500um 長度纖維。
4 、嵌縫石膏:每噸添加量 0.3 ~ 0.5 %,選用 500um 長度纖維。
木 質 纖 維
木質纖維是一種粉狀的水泥、石膏、石灰等粉體材料的多功能添加劑。木質纖維從木漿中提取,它通過切碎、中和、漂白、輾壓、篩分成不同纖維長度和粗細度的成品以適應不同應用材料的需要。木質纖維的懶性非常強,在粉體材料中它不會與任何其他材料發生反應,只起物理作用。
木質纖維在粉體材料中的作用機理
強烈的增稠增強效果
木質纖維具有強勁的交聯功能,它與其他材料混合后纖維之間立刻搭接得象毯子一樣,這個三維空間結構可將水或其他液體鎖在其間,纖維越長,增綢作用越大。
木質纖維的結構粘性可改善操作性能
當剪力作用于其上時(如刮抹、攪拌、泵送),部分液體會從纖維結構中甩到基體里,導致黏度降低,和易性提高。當剪力停止時,纖維結構又非常迅速地恢復并將水分吸收回來,并恢復原有粘度。
良好的液體強制力
木質纖維自身可吸收自重的 100 %~ 200 %的液體,并利用其結構吸附自重 2 ~ 6 倍的液體。
抗裂性
在凝固或干燥過程中產生的機械能被纖維筋減弱。
低收縮
木質纖維的尺寸穩定性非常好,這意味著混凝土料不會發生收縮沉降,并提高了其抗裂性。
抗垂
施工操作以及干燥過程中不會出現下墜現象,這使得較厚的抹灰可一次完成,即使在高溫條件下,木質纖維也具有好很好的熱穩定性。
延長開放時間
由于纖維結構的毛細管作用可將內部的水分迅速地傳輸?shù)綕{料表面及界面,使得漿料體系內部的水分均勻分布,可明顯減少成皮現象,并使得黏結強度和表面強度明顯提高,這個機理也由于干燥過程中張力的減少而明顯起到抗裂的作用。
Wood fiber
Wood fiber is powdered multipurpose additive for cement, gypsum, lime and other powdered materials. Wood fiber is distilled from wood pulp, which can be cut up, bleached, rolled and screened out to finished products with different fiber length and granularity to satisfy the demand of different applicable materials through. Wood fiber has so strong nonreactivity that it won ' t react with any other material, only plays a physical function.
Action Mechanism of Wood fiber in powdered Materials
Strong Thickening and Enhancing Effect
Wood fiber has strong cross-linking function; it will overlap with other materials immediately after mixing, like a blanket, hereby water and other liquid will be locked in this three-dimensional spatial structure, and the longer fiber is, the stronger thickening function it will be.
The structural viscosity of wood fiber can Improve Operating Performance
When shearing force acting on it ( such as scraping and plasterer, mixing and pumping ) ,some liquid will be thrown into basal body from fiber structure, which reduce the viscosity and increase workability. When the shearing force stops, the fiber structure will restore and absorb the moisture back rapidly and get back the primary viscosity.
Fine constraining Force to Liquid
Wood fiber can absorb the liquid reaching 100 %~ 200 % of deadweight, and its structure can absorb the liquid reaching up to 2 ~ 6 time of its deadweight.
Crack Resistance
The mechanical energy arousing concreting or drying procedure will be reduced by fiber muscle.
Low shrinkage
Wood fiber has such an excellent stability of size that there will be no shrinkage and settlement in the mixture, and its crack resistance has been improved.
Sag resistance
There wonit be sag during constructing operation and drying procedure, hereby the thick plastering can be finished in one time. Each in high temperature, the wood fiber still has excellent thermal stability.
Prolong opening Time
Since the capillarity in fiber structure can transport the moisture inside to the surface of slurry and interface rapidly, the moisture inside slurry system can distribute uniformly, which can reduce skinning and increase the bonding strength and surface strength obviously, at the same time this mechanism of action also plays an crack function since the strain reduced in drying procedure.
木質纖維( Cellulose Fibres )
![]() |
外觀為纖維狀,呈白色或灰白色。微觀結構是帶狀彎曲的,凹凸不平的,多孔的,交叉處是扁的,是天然木材經過化學處理行到的有機纖維。通過篩選、分裂、高溫處理、中和、篩分成不同長度和粗細度的纖維以適應不同材料的需要,由于處理溫度達 260℃ 以上,在通常 條件下是化學上非常穩定的物質,不為一般的溶劑、酸、堿腐蝕。 |